Am-713 IPL Skin Rejuvenation Hair Remmoval Machine
1. The Principle and Function
The IPL hair removal procedure produces a high intensity flash of filtered light from the applicator head, which has been placed in contact with the skin. The energy from the light source is absorbed by the pigment melanin, which is the chromophore, which gives hair its color. The hair rapidly absorbs this filtered light and transfers it to the surrounding cells that in turn are converted into heat raising them to a temperature of 70 degree Centigrade or more. The heating denatures the cells making them incapable of producing further hair growth.
2. Core technology
1)Hair Removal Swift: 6000 shots hair removal
2)Skin Rejuvenation Swift: 20000 shots skin rejuvenation
3)Spot Size: 30mm*15mm
3. Accessory
1)Hair Removal Swift: remove unwanted hairs under arms, on legs, lips or other body parts, etc.
2)Skin Rejuvenation Swift: shrink pores, tighten skin, and improve skin elasticity and glossiness
4. Operation
1)Hair Removal Swift:
This product is excellent on hair removal, and deeply into the hair root, to prevent hair grwing permanently. Hair removal include any unwanted hair.
2)Skin Rejuvenation Swift:
After using the skin rejuvenation swift, it will make the skin rejuvenation, skin whitening and pore shrinking.
TECHNCAL SPECIFICATIONS
|
Light source |
Pulsed light |
|
Energy Fluency |
Hair removal: 3.0J/cm²~10.4J/cm² |
|
Skin care: 1.8J/cm²~5.5J/cm² | |
|
Spot size |
30mmx15mm |
|
Wavelength |
Hair removal: 470~1100nm |
|
Skin care:420~1100nm | |
|
Lamp life |
HR:6000 flash, SC:20000flash |
|
Temperature |
5°C-30°C |
|
Humidity |
30%-80%RH |
|
Rated power |
200W |
|
Temperature |
-20°C to 80°C |
|
Humidity |
0%-95%RH |
FAQ
1. Is the IPL harmless if I see it direct?
The machine is designed for safe treatment. It has the sensor at the head of hand piece, and without touching this sensors to your skin, the light is not emitted.
2. What is the lamp life?
This machine shows you when you have to change the lamps module. Averagely, lamps life is 6,000 shots in HR mode, and 20,000 shots in SC mode. If it stops emittng the light automaticlly, then you have to change to new lamp module.
3. When uses Hair Removal, do I have to remove hairs completely before the treatment?
Just shave by 1cm of height. if you remove your hairs by waxing epilator, tweezers, your hair follicle absorb less heat, and this will lessen the effect.
4. Can I see the hair remained after the HR treatment?
Several hairs be remained after the normal treatment. This will be removed automatically within two weeks because the hair follicle was affected/harmed by IPL. Do not remove the remained hairs by wax, epilator, tweezers.
Remove hair each 2 weeks.
It is the best to remove hair again once hair comes back with about 1cm.
Usually, 4-8 sessions later, hair will not come back.
